What are the precautions for bedroom
Saintly Lightingequipment 1. When installing electrical lighting equipment in a masonry structure, use embedded hooks, screws, bolts, expansion bolts, nylon plugs or plastic plugs to fix it; wooden wedges are strictly prohibited. When the plan is unruly, the load-bearing capacity of the above-mentioned fixtures should match the weight of the electrical lighting equipment. 2. In places with greater risks and special risks, when the height of the lamp is less than 2.4 meters from the ground, an additional voltage of 36 should be used. Or take protective measures for lighting fixtures below volts or below. Lamps must not be directly installed on combustible objects; when the high temperature part of the lamp surface is near combustibles, heat insulation and heat dissipation measures should be taken. In the substation, high-voltage and low-voltage power distribution equipment and directly above the bus bar cannot be equipped with lamps. For outdoor equipment, the height from the ground should not be less than 3 meters; when the equipment is on the wall, the height from the ground should not be less than 2.5 meters. Wrap it with black tape and stick to a certain interval. If possible, try not to put the thread under the same piece of metal to avoid the risk of short circuit.
modern light fixtures are all following the most compatible manufacturing regulations.
Saintly is also committed to maintaining excellence, respect, and integrity in all aspects of our operations and our professional and business conduct.
modern led lighting problems are nothing new, almost every one of us have to go through them at some point of our lives and some of us never get rid of them. with the development of modern led lighting technology, now provides a perfect cure for that.
